Nowadays we are just trying to have something like signature that's, your name or some logos that you prefer, and you want to just make it on your notebook or something that you can carry around all the time. Instead of sending them to the stores, you definitely want to do it yourself and you want to practice and enjoy the happiness out of that. So today often wise have just released a new product called alphabet c50, and this is a laser machine and it's sitting right here. This just looks like fresh out of the box and it just this small it's, my palm and it's like less mind. You can even put it in your purse if you're a girl and if you're a boy, then you can put it in your backpack. So this is just the off structure of that and this is a stand which uh can be used for multiple ways. First, let it protect once you look at the color, you can see it protects your eyes it's the same color like your goggle and the assembly is really easy. They told me it could be assembled within one minute. Let'S just see how it works and make sure that the laser light doesn't go directly into your eyes. Okay, this side then, and this side, almost there, okay we're almost there. I guess nobody is counting the time like this okay. This is steady and firm and make sure that this this metal block this is really important, because we've already done a couple tests.
That is this pointing right here and you can see from here. This is already damaged and you don't want your dice or table to be looking like this, so make sure this is a plate. Definitely underneath your laser machine, okay, after looking at this it's already plugged in with the dc, but also this one support you to power. It up with your power bank, so you can just plug in the from here and connect it over there and they can just wherever you go, and even even though you don't have the plug in one with you, you cannot, you can still be bringing something you Like and looking at the size, you may ask me how big of a stuff you can print. I learned the things that are at this point right here in front of me by looking at this board, so you can laser something you can engrave or cut something that is 98 times 88 millimeters and that's for depth, and you can see from here. Okay, let's see from the side that can go one millimeter to two millimeter depth and as for the cardboard or wooden board, you probably need to do multiple times until it goes as deep as you want. Okay other than that. So the package comes with everything from here to the left and you can look at this this cardboard and this fabric and leather piece and paper board, and you can in gray workout, and it also comes with all these bricks.
I guess you can use those bricks to make your dies and also we found something very interesting to use. There is something like say: half of the size like this and you couldn't just put it underneath. You can just place the brakes over there and set it down see. It is firm and steady like it is okay, so done with all the talking over here i'm going to show you guys how to use it and first thing make sure that it sees right here on the metal board and make sure that you wear your goggles. All the time don't ask me why it's a protection to your eyes and your eyes other than disability is one of the most important thing for you to see the world so that's where they are and uh. So this support for the windows. 7 window 8 window 10, as well as for android and apple phone and we've, already downloaded one of the apps in your phone, and we are going to show you how it look like okay. So this is a page of the app, but what is called is called blue laser and once you click in and they just ask you to connect the engraving machine and it's easy to read right. So you just click on this and now here it goes for scan and you can see the bluetooth just pop up and it's very easy to recognize, which one is the correct one.
You just click on this. It brings you right to the home page and our home page. You can see all those things and the first one say take a picture it's easy to understand right. You just click a list. Take a picture and let's see you click on the picture and you use a photo and you're going to see how it looks like and you transmit it correctly size of the printing area. Also, here is a setup section over here. If it comes with chinese or english, but you are speaking some other languages, you can switch your language from here or you can read the information from the engraving configuration or you can also ask for help. If there is something wrong after they use it or something or you can just you can set up stuff over here and upgrade the app as well that's one thing we really need to mention here once you purchase list all the things that you have to do Is upgrade your app and they're gon na bring you all the additional features and okay let's get into this again, and if this doesn't pop up, you can click on the scan, and it goes here and other than taking a picture. It also supports the whiteboard. So you can type in all the information that you want or from your album, or there is material library that you can choose from. So this is very easy to use, and once you choose this and you just click on the transmit – and it goes, you may ask me: how long does a what's the lifetime of this? So it runs up to ten thousand hours and after ten thousand hours we can't guarantee this problem it's still running properly.
However, just do your calculation guys one ten thousand hours there's a couple of years, it's about time that you are very familiar with this machine and upgrade it to a much professional one and much bigger one. So you can actually build something out of yourself so and we've also made some complicated ones, are like a clock one over here and the same clock, one on the notebook and also um it's supposed to i guess or is something like a piece of card or You can just place your cup over there and least now. Last but not least, this is a gearbest guitar. I don't know who's going to play it, but we can save it until the annual party and if you have anything i solved or you asked me for. Oh there's, one thing really people would ask about the metals because we don't have the metal samples or the plastic samples listed in front of us, because first, we can definitely print out the metals but make sure those are coated ones because anchoring ones with the reflection Can just burn or hydrolyze because it goes the other way and also we can uh crave our stainless steel, but make sure those are marked with the black marks pen. The same the same theory, because uh the refraction goes the wrong way and if liz, if there is something wrong with the laser, can you disassemble it sure you can definitely disassemble it and with the trimmer or screwdriver? But you have to make sure that you purchase the the same size of the laser like you originally got, and you can get something printed like the the peeler shape.
But you have to also purchase those schoolers, so that's pretty much everything we are covering today and a bonus today is that we are going to do one free giveaway for this this year sample in front of me and giveaway rules. Do you guys still remember that? First, you have to subscribe gearbest channel and then you have to like this page and also you have you have to share as many times as many channels as possible and we are going to just randomly select one from all the lists that you want this one. So it's pretty much about outlining everything today and if you have any questions, just leave a message: we'll have someone get back to you. I wish you are enjoying your purchase with gearbest. So take care and see you next time.